Texturing Curing Machine

Salient Features &Technical Specification

• Kirloskar Make Engine
• Diesel Ha494
• 4 Cylinder Engine
• Power :ED HP (44.8 kW) @ 2800 rpm
• 100 liters of Fuel Reservoir

• 24 Volt Alternator Voltage Supply
• Electronic-Over-Hydraulic System
• Forward & Reverse Steering and Grade Control is Sensored off the same String line as the Paver.
• This provides ease of Operation and Accuracy in Texturing and Curing.

• 1000 liters of Curing Compound Tank
• 200 liters of Hydraulic Oil Reservoir
• Dual Stage Pump: Axial Piston Pump 45 cc/rev (Main Piston Pump (Kawasaki). Dual Stage Dynamatic Pump 21 cc/rev + 11 cc/rev
• 4 Nos of 10 Micron Absolute Filters
• Hydraulic Fan Forced Air-Oil Cooler

• 5 Nos of MOBA make Sensor

• Two hydraulically powered. TATA make gear-driven crawler tracks.
• Track Dimension (LxWxH): 3170 x 400 x 600 mm
• Track pad Dimension (Lxw) :150 x 400 mm
• Track Speed is Variable up to 30 mpm (meter per minute)
• Gearbox reduction ratio is 45:1

• Wire Tines is 1200 mm to 3000 mm Wide and 127 mm Long.
• 1000 Liters reservoir, pumps with hydraulic motor and controls with spray bar.
• Spraying Pump : 23 l/min (maximum)
• Filling Pump : 114 l/min (maximum)

• Steel welded frame and pin-connected together according to finishing width.
• Main Frame Length is from 3600 mm to 18000 mm and Width is 1650 mm.
• Frames are available in length of 610 mm, 1220 mm & 2440 mm
• 4 nos of Hydraulically adjustable heavy duty mechanical jacks are provided for maintaining the machine level
• Operators Platforms : Light-weight working platform of high quality MS chakker Plate.